How Often Should You call Alberta Furnace Cleaning in Calgary
If you live in an area that is cold, having a newer furnace with the latest technology is an added bonus. Almost a decade ago, you needed to check your furnace at least once a year. However, boilers and furnaces today have electronics that make auto adjustment during cold seasons. There are only a few things that a service technology experts need to do when performing furnace cleaning in Calgary.
Initially, servicemen used to do have to do many things when doing furnace cleaning. They would pull the burners and blow them with CO2, then inspect the heat exchanger for cracks by use of the mirror, and then vacuum to remove any dirt. They would also change the thermocouple on the pilot light out of its assembly to make it burn clean.
After that, they would pull the blower from your furnace when doing Furnace Cleaning in Calgary and check the belt for cracks. All the technician has to on the blower is to apply oil on the motor bearings. After checking for cracks on the heat exchanger and cleaning the burners, you will start enjoying the services of your blower by getting everything back in place.
The technician would also check the flue pipe to make sure that birds do not get stuck in it. Finding birds in the furnace is common even in furnaces in the basements. Nowadays, it does not happen with the new series of furnaces as they have unique features for preventing this.
Boilers and furnaces nowadays do not require deep attention like the previous versions. The flame sensor is the only aspect you need to check on your current furnace if it is a newer version. They basically watch themselves and do personal maintenance. Most of the new series of furnaces do not get dirty because they self-clean when closed. They have a circuit board that runs the gas valve, blower, and other safety controls. You typically can wait about three years before performing another Alberta Furnace Cleaning in Calgary.